banner perso

Some links about me. Many of my 3D designs are free. I also post on Google+ and in another blog,

Thursday, August 14, 2014

Home made filament drying box

How to make a simple dehydrator (drying box) with a solar vacuum tube

A short and probably overkill post for a passive and zero carbon footprint drying box (not counting the required one to make the tube).

I use a spare, high tech and powerful vacuum solar tube, but it is easy to make something with a copper or steel tube painted in black, around which you slide larger transparent plastic bottles. Such insulation is required to avoid the ambient air temperature from cooling your own heated air.

The second required item is a brand used low-tech cardboard box.

Sunday, August 10, 2014

E3D v6 hot end: ideas and assembly tricks

Assembled E3D v6 with a few particularities
You may remember that I wrote broadly about hot ends in an another post, but this short new one is specifically about the sixth revision of the E3D family (E3Dv6).

This is probably the best hot end on the market right now (in my opinion -- and I did not check them all). It is not cheap, hence expensive as all the good quality hot ends. But this is a critical part where you cannot really lose money if you value your time...

However there are still some room for some improvements. 

About Me

My photo

If you know me and you cannot tell exactly what my real job is, then you probably found the right Jeremie. Check for some pointers.

I am self-employed and I help start-ups, research centers, small companies with their needs related to computers, sensors, data processing and mechatronics. If you have a project and know what "R&D" is, then you already sparked my interest ;)