banner perso

Some links about me. Many of my 3D designs are free. I also post on Google+ and in another blog,

Monday, March 30, 2015

CNC fail? 3D printed design blows my ears instead of the dust

I bought a well-built Chinese CNC machine last year, namely a 4 axis CNC3040Z-DQ router/engraver, for about €1000 (as far as I remember).

Milling a PCB with a low cost CNC router/engraver controlled by LinuxCNC.
My initial need was to "etch" electronics PCB boards at home, to get rid of so called proto- and perf boards. This machine is overkill for the job, but I do not regret my purchase since it can do much more than PCB milling...

But only recently did I spend enough time to use it. Even though the reliability and consistency of a CNC milling machine is way better than that of a 3D printer, the whole process is cumbersome. It takes a lot of time to get used to the software, which is a decade behind the ergonomics of more intuitive 3D printing software. Worst, the controlling software like linuxCNC or Mach3 still require a parallel port and a special real-time distribution of linux. Both are a real pain because you need a dedicated and obsolete machine just to drive the CNC. Recent projects like GRBL are knocking at the door though, as an alternative to parallel port hardware: they rely on Arduinos, but are limited by the power of this platform. ARM-based boards are more promising, especially for fast machines, or when you have more than 3 axis of freedom (e.g. see 6DoF)

Note: I may write more about CNC machining at home, its software and process in other posts. But I start here with a quick, funny, and miserable failure of mine, that was meant to be an improvement in the first place. And, well, it mixes printing and milling so it is a good transition.

About Me

My photo

If you know me and you cannot tell exactly what my real job is, then you probably found the right Jeremie. Check for some pointers.

I am self-employed and I help start-ups, research centers, small companies with their needs related to computers, sensors, data processing and mechatronics. If you have a project and know what "R&D" is, then you already sparked my interest ;)