banner perso

Some links about me. Many of my 3D designs are free. I also post on Google+ and in another blog, oz4.us

Saturday, November 17, 2012

Short belt tensioner for NEMA 17 stepper motors

How to tension the Ultimaker short belts once for all?

Upside version of the tensioner
The short belts that drive the main rods from the X and Y steppers must always be kept tight. Otherwise the print quality really gets bad. Two symptom that are easy to spot is non-round cylinders or "bouncing" waves in the surface of the print.

The usual fix is to unscrew the 4 bolts, push the motor downwards with a thumb and tighten the screws very hard while keeping the pressure...

I just could not stand this anymore, so I designed this thing and this derivative (with an additional spring).



Sunday, November 11, 2012

Auto shutoff at end of print

Kill your 3D printer when it gets lazy !


Given the heat a 3D printer can generate, even when idle, I would better kill it than let it powered unattended, both for the planet, and to reduce the slightest risk of fire. ;)

I stick here to the simplest and most straightforward modification, partly because it is already supported by the Marlin printer firmware.

By the way, the total cost is less than $10, and you will just need a few solder points!

Sunday, November 4, 2012

Major wood FDM printing breakthrough !

Extremely efficient wood 3D printing system


This is incredible...

No need for a hot bed, no issue with massive overhangs, no stringing at all, no retraction, grinding nor feeding issues, not even noise, smell nor chemicals.

Free and easy sourcing of material, highly portable, robust, self-powered and auto-adapting printing system. And damn, they even master wood gradients and polygonal infill!

Now, on the downside: it comes without a user manual and the system is incompatible with g-code. And sometimes, it stings.

How nasty.


Thursday, November 1, 2012

Poll: what are the features you added to your stock Ultimaker ?

What are your Ultimaker features?

Here is an on-going poll motivated by this post on the Ultimaker google forum. So please keep your comments for the forum!

I finally developed my own blogger poll system after failures with the official and restrictive blogger polls.

About Me

My photo

If you know me and you cannot tell exactly what my real job is, then you probably found the right Jeremie. Check zax.fr for some pointers.

I am self-employed and I help start-ups, research centers, small companies with their needs related to computers, sensors, data processing and mechatronics. If you have a project and know what "R&D" is, then you already sparked my interest ;)